Handleiding
Je bekijkt pagina 50 van 60
EN / 50
Error codes/reasons and possible solutions
Error codes Error reasons Possible solutions
E1 – E11
An induction hob communication er-
ror has occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E 16 - E 21
An induction hob temperature sensor
error has occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E22
E26
Induction hob is overheating.
Turn off the induction hob and wait
for it to cool down. The error will dis-
appear when the hob temperature
drops below the limits. If the problem
persists, contact the authorized ser-
vice.
E23
E24
An induction hob software error has
occurred.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E25
An error occurred in the induction hob
fan operation.
Turn off the induction hob and turn it
back on after 30 seconds. If the prob-
lem persists, contact the authorized
service.
E27
E47
Induction compatible pots were not
used.
The error will disappear when an in-
duction compatible pot is used.
E 31 - E 39
A hardware error has occurred in the
induction hob electronic card.
Turn off the induction hob and turn it
back on after 30 seconds. If the error
persists, disconnect the product from
the power supply and reconnect it. If
the problem persists, contact an au-
thorized service.
E 42
An electrical connection error has oc-
curred.
Re-establish the correct electrical
connection by referring to the
product's technical table and installa-
tion manual.
E46
One or more keys were held down for
more than 10 seconds.
An object was left on the control
panel or it was exposed to steam.
Once you take your hand off the hob,
the problem will disappear.
Once the control panel is cleaned, the
problem will disappear.
E48
E49
E 51
An induction hob sensor error has oc-
curred.
Sensor hardware must be brought
into compliance with the conditions
of use. If the error persists, discon-
nect the product from the power sup-
ply and reconnect it. If the problem
persists, contact an authorized ser-
vice.
Bekijk gratis de handleiding van Blomberg HIRN651N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blomberg |
| Model | HIRN651N |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6491 MB |
