Handleiding
Je bekijkt pagina 30 van 60
EN / 30
ð “00” symbol will illuminate on
timer display and decimal point
will appear on the selected cook-
ing zone display.
Right rear and left rear cooking
zone displays serve as timer dis-
play when the timer is active.
5. Touch or keys to set the desired
time.
The timer can only be set for the
cooking zones already in use.
Repeat the above procedures for
the other cooking zones for which
you wish to set the timer.
Timer cannot be adjusted unless
the cooking zone and the temperat-
ure value for the cooking zone are
selected.
When the cooking zone for which a
timer was set is selected, you can
see the remaining time by touching
the key again.
Deactivating the timer
Once the set time is over, the hob will auto-
matically turn off and give an audible warn-
ing. Press any key to silence the audio
warning.
Turning off the timers earlier
ü If you turn off the timer earlier, the hob
will carry on operating at the set tem-
perature until it is turned off.
1. Select the cooking zone you want to
turn off.
2. Touch key to turn the timer on.
3. Until “00” appears on the timer screen,
touch to set the value to “00”.
ð Dot shaped light on the relevant cook-
ing zone display itself turns off com-
pletely after having flashed for a cer-
tain period of time and the timer is can-
celled.
Power management function It varies de-
pending on the product model. It may not
be available on your product.
Your product has a power management
function. With the help of this function, you
can change the total power setting that the
hob will draw.
Power management can only be
done when the hob is first installed
and first energized. You can com-
plete the setting by following the
steps below within 30 seconds
when the hob is first energized.
Power management function - Adjustable
total power levels
Power management display indicator
Total power
25 2.5 kW
30 3 kW
36 3.6 kW
44 4.4 kW
54 5.4 kW
57 5.7 kW
67 6.7 kW
72 7.2 kW
If the total power of your product is
below the desired power, your
product will operate at the total
power level given in the technical
table. (Technical Specifications)
To change the total power;
1. When the product is first energized,
touch the keys / / / / within
30 seconds.
2. The power management level set is dis-
played on the timer display.
Bekijk gratis de handleiding van Blomberg HIRN651N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blomberg |
| Model | HIRN651N |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6491 MB |
