Blodgett INVOQ 101BE handleiding
Handleiding
Je bekijkt pagina 84 van 96
84
Replacing the HydroShield water lter
IMPORTANT!
Always replace the HydroShield water lter:
• If the oven display shows the warning “Filter change
needed”.
• On a regular basis and no later than 12 months after
installation.
• If the oven has not been used for four weeks or more.
If you ignore replacing the lter, it will cause damage to the
oven.
1. Turn off the water supply.
2. Remove the HydroShield water lter by turning it clockwise.
3. Pull the HydroShield water lter out of the lter head.
CAUTION
Risk of slipping
• Be careful when you remove the used HydroShield
water lter as it is heavy and lled with water.
4. Remove the new HydroShield water lter from the packaging.
5. Remove the hygiene cap.
6. Write the installation and replacement date on the lter.
7. Turn the HydroShield water lter anticlockwise in the lter head.
8. Reset the water lter. For more information, see section “Setting the
HydroShield water lter”.
9. Turn on the water supply.
8
2
7
1
2
1
2
Bekijk gratis de handleiding van Blodgett INVOQ 101BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | INVOQ 101BE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10240 MB |
