Blodgett INVOQ 101BE handleiding
Handleiding
Je bekijkt pagina 78 van 96
78
Setting the HydroShield water lter
When you have replaced the HydroShield water lter, you must update the
HydroShield water lter settings according to the new HydroShield water lter.
We highly recommend that you use the water drop
test to test the water hardness as this test is more
precise and thus you get better utilisation of the
HydroShield water lter.
See section “Testing the water hardness” in the
installation manual.
1. Touch “Settings” in the home screen menu.
2. Touch “General settings”.
3. Touch “Water lters”.
4. Make the relevant changes.
Value Description
“Hardness” Select the water hardness based on the result of the
water hardness test. Use “Simple” mode if you use
the water test strips or “Advanced” mode if you use
the water drop test.
“Filter” Select the HydroShield water lter size that you have
installed.
“Filtered water
inputs”
Select between “none”, “steam” and “steam & wash”.
“Filter alerts” Toggle the lter alert on or off.
“Filter changed” Touch “Filter changed” to reset the counters.
Table 19
For more information about how to mount the HydroShield water lter, see
section “Replacing the HydroShield water lter”.
Bekijk gratis de handleiding van Blodgett INVOQ 101BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | INVOQ 101BE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10240 MB |
