Handleiding
Je bekijkt pagina 9 van 38
7
Installation
Electrical Connections
ALL MODELS
NOTE: Electrical connections must be performed by a
qualied installer only.
Before making any electrical connections to these appli-
ances, check that the power supply is adequate for the
voltage, amperage, and phase requirements stated on
the rating name plate mounted on the appliance.
The circuit breaker that is used to provide power to this
appliance must have a minimum of .076” (3mm) contact
spacing. The circuit breaker must meet all Local and Na-
tional installation standards.
All appliances must be installed in accordance with Local
or National Electrical codes.
This appliance uses a variable frequency drive, which can
be known to produce high frequency electrical noise. In
some cases units must be hard wired. This avoids false
positives on ground fault devices susceptible to errors
from electrical noise. All installations must comply with lo-
cal and national codes.
A wiring schematic is located on the inside of the remove-
able top panel.
NOTE: Disconnect the power supply to the appliance
before servicing.
WARNING!!
Improper installation may invalidate your war-
ranty.
WARNING!!
If the supply cord is damaged, it must be re-
placed by a special cord or assembly available
from the manufacturer or its service agent.
Bekijk gratis de handleiding van Blodgett ImVection IMV-4E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | ImVection IMV-4E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9314 MB |
