Handleiding
Je bekijkt pagina 7 van 38
5
Installation
Oven Location
OWNER’S RESPONSIBILITIES
Installation responsibilities prior to service startup inspec-
tion
You are entitled to a free start-up inspection service by
our factory ASAP. Before a factory representative arrives
to perform a startup procedure, the owner must already
have satised the following requirements.
1. Oven(s) are uncrated and put in place.
OVEN LOCATION
The well planned and proper placement of your oven will
result in long term operator convenience and satisfactory
performance.
Certain minimum clearances must be maintained be-
tween the oven and any combustible or non-combustible
construction. See the table below.
In addition, the following clearances are recommended
for servicing.
• Oven body sides - 12” (30cm)
• Oven body back - 12” (30cm)
OVEN
MODEL
MINIMUM REQUIRED CLEARANCES
Right Side Left Side Back
IMV-4E 4”
(101.6mm)
4”
(101.6mm)
2”
(50.8mm)
• Do not place strong sources of heat such as open
ame ranges, griddles, or charbroilers near the
oven.
• Note that if temperatures are too high, a safety shut-
down may occur.
• Failure to comply may invalidate the oven warranty.
Bekijk gratis de handleiding van Blodgett ImVection IMV-4E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | ImVection IMV-4E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9314 MB |
