Handleiding
Je bekijkt pagina 37 van 38
35
Maintenance
Cleaning and Preventive Maintenance
WARNING:
Wear proper PPE and adhere to the MSDS
instructions of the oven cleaner.
WARNING:
The oven operates at very high tempera-
tures and retains heat for some time even
after cooling. Take caution that the oven
has properly cooled.
WARNING:
Failure to follow these instructions may
harm the catalytic converter and void your
warranty. Do NOT spray any cleaning
agents or water into the small holes that
house the catalytic converter. See images
below in procedure.
1. Ensure the oven has cooled prior to cleaning. If either
the Blodgett “Start Screen” or the screen stating “Safe to
Clean” is present, the oven has cooled enough to clean.
See images below.
2. Remove the wire cooking rack from each oven cham-
ber. Remove the jet plate assemblies from each cham-
ber. There is one in the Top and one in the Bottom of
each cooking chamber.
3. The cooking racks and jet plate assemblies may be
cleaned in a Dish Machine or Soaker.
NOTE: If the Dish Machine or Soaker does not remove
all grease of the jet plate assemblies, it is possible
to take the jet plate assemblies apart. Take care of
disassembling and reassemble properly.
CAUTION:
Do NOT spray oven cleaner into the holes on
the left side and rear of the chamber. Do not
spray directly onto the light. Doing so can
damage critical oven components, resulting in
a non-warranty service call.
Bekijk gratis de handleiding van Blodgett ImVection IMV-4E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | ImVection IMV-4E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9314 MB |
