Blodgett CNVX-14G handleiding
Handleiding
Je bekijkt pagina 54 van 54
52
Maintenance
Cleaning and Preventive Maintenance
DAILY CLEANING
Cleaning the Interior
Daily cleaning of the oven is essential for sanitation, and
to ensure against operational diculties. The stainless
steel cavity may corrode with improper cleaning of the
oven. Use an oven cleaning detergent in conjunction with
the supplied spray bottle.
For dicult cleaning, allow the spray-on oven cleaner to
work longer before rinsing.
1. Open the oven door. Place the oven in cool down
mode. Let the oven cool to below 140ºF (60ºC).
2. Fill the spray bottle with a mild oven detergent. DO
NOT use abrasive cleaners on your Blodgett
Combi. Be sure to follow the MSDS or safety in-
structions on the bottle of your oven cleaner.
3. Pump the bottle twenty times to build up pressure.
The higher the pressure, the ner the spray. Spray
the oven interior. Turn the nozzle to adjust the spray
pattern.
4. Close the door. Place the oven in steam mode for 10
minutes.
5. When nished steaming, open the door and rinse the
interior with the attached spray hose.
Figure 44
6. Leave the door open overnight to vent the oven. If the
oven will not be used for an extended period of time,
place the oven in hot air mode to dry.
Figure 45
Cleaning the Exterior
The exterior of the appliance may be cleaned and kept in
good condition with a light oil. Saturate a cloth and wipe
the appliance when it is cold; wipe dry with a clean cloth.
WARNING!!
DO NOT spray the outside of the oven with
water or clean with a water jet. Cleaning with
a water jet can impregnate chlorides into the
stainless steel, causing the onset of corro-
sion.
Clean the air intake / cooling fan behind the oven so that
it is free of all lint, grease or other inhibitors of air ow.
Keeping this area free of obstruction will extend the life of
the components.
PREVENTIVE MAINTENANCE
The best preventive maintenance measures are the
proper initial installation of the equipment and a program
for cleaning the appliance routinely. The oven requires no
lubrication. Contact the factory, the factory representative
or a local Blodgett service company to perform mainte-
nance and repairs should they be required.
WEEKLY CLEANING
In addition to the daily cleaning it is necessary to clean
the air intakes on a weekly basis. Air intakes provide nec-
essary cooling air to the internal components. They are
generally located on the rear and sides of the equipment.
Bekijk gratis de handleiding van Blodgett CNVX-14G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | CNVX-14G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14122 MB |
