Blodgett CNVX-14G handleiding
Handleiding
Je bekijkt pagina 24 van 54
22
Operation
SmartTouch 2 Touchscreen Control
MANUAL MODE COOKING
1. Press POWER to turn on the oven.
2. Press MANUAL to proceed to the manual cook
screen.
3. Set the following cooking parameters from the MAN-
UAL screen.
Temperature - Press the temperature text and enter
the desired oven temperature on the keypad provid-
ed. Press ENTER to save.
Cook Time - Press the time text and enter the de-
sired cook time on the keypad provided. Press EN-
TER to save. Press the units text to toggle between
hours/minutes and minutes/seconds.
Fan Speed - Press the fan speed text to toggle be-
tween Gentle, Low, High or Turbo.
NOTE: If the oven is preheating or cooling down,
the fan speed will automatically run in high
until the oven reaches the set temperature.
4. Press the FLYOUT MENU arrow to access the follow-
ing parameters.
Actual Temp - Press to display the actual cavity tem-
perature
Core Probe Cooking - Press to use the core probe
cooking feature.
Add a Minute - Press +1 MIN to add 1 minute of time
at any point during the cook cycle.
Hydro Burst
a. To add 100% humidity at any time during a cook
cycle, press the HYDRO BURST KEY (13).
b. Rotate the knob to enter the length of time you
wish to inject the moisture.
c. Select OK to start injecting humidity.
Vent Position - The vent can be opened or closed by
toggling the VENT icon at any point during the cook
cycle.
Fan Delay - Press the fan delay icon. Use the pro-
vided keypad to enter a fan delay increment. Press
ENTER to save.
Fan Reversal Interval - To adjust the fan reversal
time, press the FAN REVERSAL icon. Enter the de-
sired reversal interval on the keypad provided. Press
ENTER to save.
Lights - At any time the lights can be turned on or o
by toggling the LIGHT icon.
5. The oven preheats to the set temperature.
NOTE: START will not be displayed until the oven
has reached the set temperature.
6. Press START to begin cooking. The display counts
down. Press CANCEL at any time to stop the cook
cycle.
7. When the cook time has expired, the display ashes
DONE and the alarm sounds. Press CANCEL to si-
lence the alarm. The display returns to the previous
cook time setting.
8. Press BACK to exit out of MANUAL mode.
CORE PROBE COOKING
1. Press POWER to turn on the oven.
2. Press MANUAL to proceed to the manual cook
screen.
3. Select Core Probe Cooking from the yout menu.
4. Press the probe target text. Enter the desired nished
product temperature on the keypad provided. Press
ENTER to save.
5. Insert a core probe into the probe outlet on the control
panel.
6. The HOLD button appears. To enable the Cook &
Hold feature, press the hold button.
7. When the product has reached the set core tempera-
ture the display reads DONE.
8. Cook Only - Unplug the core probe and remove the
product.
Cook & Hold - The oven cavity temperature adjusts
to the optimum temperature for holding the product
without overcooking. The display counts up the time
the item has been holding. The cavity temperature
jumps to 4°F above the product setpoint. This tem-
perature will hold the product, keeping it warm with-
out continuing the cooking process.
Bekijk gratis de handleiding van Blodgett CNVX-14G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | CNVX-14G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14122 MB |
