Blodgett BLCT-6-6E handleiding
Handleiding
Je bekijkt pagina 28 van 37
26
Maintenance
Cook Time Correction
The cook to perfection function helps recipes compen-
sate for temperature uctuations. These can occur when
transitioning between recipes with dierent temperatures,
opening the door, or adding frozen products. The system
makes real time adjustments to cook time ensuring qual-
ity cooking.
CTC threshold (%)
CTC threshold accounts for when the cavity temperature
is below the recipe set temperature. Time will be added
to the recipe as long as the cavity temperature remains
below the CTC threshold percent of temperature.
EXAMPLE: The oven preheats to a recipe’s set tempera-
ture of 350°F and a frozen product is loaded. The temper-
ature of the frozen product and opening the door causes
the cavity temperature to drop to 230°F. The CTC will be-
gin extending the total recipe time as long as the cavity
temperature remains below the programmed threshold
value, at 80% this equates to 285°F. This compensates
for the time it takes the oven to recover to the 350°F
called for in the recipe.
CTC tolerance (°)
The CTC tolerance value is a temperature range. If the
oven’s measured temperature is outside the range of de-
sire temperature, the unit will adjust cook times. Unlike
the threshold value, the tolerance compensates when the
oven is too high above set point as well as below set point
by adding or subtracting time as needed.
EXAMPLE: Using the same example of 350°F, a 15° tol-
erance means that time will be added to the recipe as
long as the cavity is lower than 335°F and subtract if cav-
ity achieves temperatures above 365°F. This may be the
case if you go from a recipe with a higher set temperature
to a lower temperature without allowing the oven to cool.
To set up Cook Time Correction (CTC)
1. From the MAIN MENU select Settings.
2. Select Cooking settings.
3. Select Menuplanner.
4. Select CookTimeCorrection.
5. Set CookTimeCorrection to YES to enable.
6. Select CTC THRESHOLD. Enter the percentage of
set temperature you would like CTP to use for a tem-
perature threshold.
7. Select CTC TOLERANCE. Enter the temperature you
would like CTP to use for a temperature tolerance.
8. To set up for recipe mode, return to step 3 and select
Recipe..
Figure 20
Bekijk gratis de handleiding van Blodgett BLCT-6-6E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | BLCT-6-6E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6277 MB |
