Blodgett BLCT-10E handleiding
Handleiding
Je bekijkt pagina 23 van 37
21
Operation
MenuPlanner Timer
box to edit the cook parameters. Drag your nger up
and down to select the desired level. Touch the box
again to select the value shown.
7. Touch the fan speed icon in the lower left hand side
of the screen. Select the desired fan speed from the
presented list.
8. Touch the vent position icon in the lower right hand
side of the screen to open the exhaust settings. Touch
the vent icon to toggle the vent open and closed. Se-
lect a time on the right hand side of the exhaust set-
tings to set a vent opening time. After this timer elaps-
es the vent will open. Touch OK to continue.
9. Touch the check mark icon in the upper right hand
side of the screen to save the recipe step.
Editing a Recipe
1. From the recipe selection screen, touch the pencil
icon in the upper right hand corner of the screen to
enter recipe edit mode. Pencil icons will appear next
to each recipe.
2. Touch the pencil icon next to the recipe you want to
edit. A menu will appear.
3. Touch Details to edit the recipe.
Figure 15
Selecting a Group
1. From the Menuplanner selection screen, touch the
group you’d like to cook to enter the Menuplanner
cook screen.
NOTE: When transitioning from MENU to COOK
screens, a pop-up will appear notifying the
user that the unit is preheating. This screen
will automatically clear when the oven has
achieved set temp and is ready for use. The
door must remain closed in order for the unit
to preheat.
2. To select a new group from the Menuplanner cook
screen, clear all racks. This can be done by either
pressing the red X icon next to each active recipe,
cancelling all recipes in progress, or allowing all items
to nish cooking.
3. Once all recipes have been removed from the racks,
select the left arrow ◄ key in the upper left hand
corner of the screen to return to the Menuplanner
selection screen.
4. Select the desired group or a recipe within the desired
group to re-enter the cook screen.
NOTE: If transitioning to a group with a higher
temperature, an additional preheat se-
quence may be required. If transitioning
to a group with lower temperature, a cool
down sequence may begin. If the door is left
closed the unit will inject water to speed this
process.
Figure 16
Bekijk gratis de handleiding van Blodgett BLCT-10E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | BLCT-10E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6277 MB |
