Blizzard Outpost RGBALC handleiding
Handleiding
Je bekijkt pagina 13 van 20
Page 13
Outpost™ RGBALC Manual - Rev. A © 2024 Blizzard Lighting, LLC
Custom Programs
Allows users to create up to 3 customizable, 25 scene programs that are directly accessible via the control
panel and also in DMX mode.
Creating A Custom Program:
1.) Use <MENU> and <UP/DOWN> to navigate to Program, then press <ENTER>.
2.) Highlight Chase 1, Chase 2, or Chase 3, and press <ENTER>.
3.) Now you can edit Scene 1 by adding any of its 5 built-in programs (Auto 1-5), and adjust
its speed (Auto Speed 0-255), and also set the duration (in seconds) before moving on to the
next scene (Time 0-255). You can also add a fade in eect to the start of this scene (Wait
0-255), and/or strobe (Strobe 0-255). Finally, if you want to use this scene in your program,
be sure to enable it (USE: YES/NO).
4.) Repeat to create up to 25 scenes for each of the 3 programs.
Red Intensity (0-255) Cyan Intensity (0-255) Wait (0-255, fade in fast to slow)
Green Intensity (0-255) Strobe (0-255, slow - fast) Use (No/Yes) Use scene in program?
Blue Intensity (0-255) Auto 1-5 (auto programs)
IMPORTANT:
If USE is set to NO, or TIME is set
to 0, the scene will not run!
Amber Intensity (0-255) Auto Speed (0-255, fast - slow)
Lime Intensity (0-255) Time (0-255, scene time in seconds)
Running A Custom Program:
1.) To view your newly created lighting masterpiece, use the <MENU> and <UP/DOWN>
buttons to navigate to Auto, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Chase 1, Chase 2, or Chase 3 and press
<ENTER>. These are directly accessible from the built-in program channel in DMX mode.
Auto Mode and Speed Settings
Set single or Master/Slaved units to run automated programs at user-selectable speeds.
Auto Mode:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to navigate to Auto, and press
the <ENTER> button.
2.) Now use the <UP/DOWN> buttons to highlight any program ranging from Auto 1-5, and
press <ENTER>.
Auto Speed:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to Auto and press <ENTER>,
then with the <UP/DOWN> buttons navigate to Auto Speed, and press the <ENTER> button.
2.) Make a selection from 0-255, and press <ENTER> to choose a speed (fast <--> slow).
5.) These static colors are directly accessible from the Eect Channel in DMX mode.
Bekijk gratis de handleiding van Blizzard Outpost RGBALC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | Outpost RGBALC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2255 MB |
