Blizzard Enigma M4 handleiding
Handleiding
Je bekijkt pagina 10 van 52
Enigma™ M4 Manual - Rev C Page 10 (c) 2023 Blizzard Lighting, LLC
3. Patching
In this chapter, we will introduce how to setup/patch dimmer channels and xtures.
3.1 Assign the Fixture Addresses
First, you will need to patch your xtures to tell the controller what kind of xtures you want to control. The controller will
oer an open DMX address automatically during patching. You can patch all your xtures rst and check their patching
addresses before assigning them to xtures. Alternatively, you could assign DMX addresses on the xtures rst, and then
set the correct addresses during patching.
3.2 Patching Fixtures
To control intelligent xtures or dimmer channels, you should patch them on the xture keys rst. There are 20 xture
pages, and each page has 20 xture keys for patching. A maximum 400 xtures can be patched.
3.2.1 Patching Dimmers
Each xture key can control single or multiple dimmer channels.
• Press the Patch key, and then press [Patch New Fixture].
• Press [Patch Dimmer]. The patch window on the left will show patched xtures.
• Press the [A] on the Start DMX Address option, and you will nd the outputs (A and B). Input a value to setup the
initial DMX address in the blank eld. You can use the numeric keys or Wheel D to set the value.
• Press Wheel D to switch to the Unit start number. Input a value in the blank eld (see photo below).
• Press Wheel D again to switch to Quantity and input a value. If the quantity = 1, this will patch a single dimmer
channel on the number entered in the Unit start number, and if the quantity > than 1, this will patch a sequence
of dimmers, each to its own key. The range of dimmers will be patched in sequential order.
• Press [Conrm] to nish patching. The PATCH SETUP will be renewed.
• You can also patch multiple dimmer channels on the same unit key. For example, you can set a previously used
Unit start number in this option when patching other dimmers. If this is the case, the eld will display in green, and
its DMX address will increase by 1 after it is patched. (see photo above).
• Press [Exit] to quit to LIVE SHOW.
Bekijk gratis de handleiding van Blizzard Enigma M4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | Enigma M4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6712 MB |
