Blizzard Aria Profile 36° handleiding
Handleiding
Je bekijkt pagina 9 van 16
Page 9
Aria™ Prole RGBW Manual - Rev. A © 2017 Blizzard Lighting, LLC
Connection With Mains
Step 1: Connect the xture(s) to the mains with the supplied power cord.
The connection must be
connected to ground (earth).
Step 2: This product comes
with a power input cord
and supports power linking.
Power linking interconnect
cords are available from
Blizzard Lighting.
Mounting & Rigging
This xture may be mounted in any SAFE position provided there is enough
room for ventilation.
Mount the xture using a suitable “C”
or “O” type clamp. The clamp should be
rated to hold at least 10x the xture’s
weight to ensure structural stability. Do
not mount to surfaces with unknown
strength, and ensure properly “rated”
rigging is used when mounting xtures
overhead.
Adjust the angle of the xture by
loosening both knobs and tilting the
xture. After nding the desired position,
retighten both knobs.
A safety cable MUST ALWAYS be used.
AC100-240V, 50/60HZ
Gobo Holder
Take out the gobo frame, loosen the screws, insert the gobo and re-tighten the
screws. When complete, insert the gobo frame into the slot.
Rotating the Barrel
Loosen the knobs located behind the shutters on the housing, and rotate the
barrel. Once positioned, tighten the knobs to lock it in place.
Gel Frame Holder
Loosen the screws, insert a color gel sheet, and re-tighten the screws. When
complete, insert the gel frame into the slot.
Bekijk gratis de handleiding van Blizzard Aria Profile 36°, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | Aria Profile 36° |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1796 MB |
