Handleiding
Je bekijkt pagina 48 van 156
46
SECTION 5: CARE AND CLEANING
5.1 CLEANING AFTER USE
1� Add hot water and 1-2 drops of liquid dish soap to the blender jar�
2� Place the lid tightly onto the jar, place the jar on the motor base and press and
hold the pulse button for 5-10 seconds�
3� Rinse all soap from the jar and lid with water�
4� If the jar is stored upside down, shake excess water from the jar after cleaning�
Note: WildSide+™ and FourSide™ jars can be stacked to save space.
5.2 LONG-TERM SANITATION
1� Sanitize the jar per local code by filling the blender jar with a sanitizer diluted to
the manufacturer’s specifications� Bleach, properly diluted, can be used�
2� Leave the diluted sanitizer in the jar for 5 minutes�
3� Empty the sanitizer from the jar�
4� Rinse jar thoroughly with water�
5� If the jar is stored upside down, shake excess water from the jar after cleaning�
5.3 MOTOR BASE AND SOUND ENCLOSURE CLEANING
• Ensure the blender is unplugged before cleaning�
• Wipe down the plastic housing of the motor base, gaskets, metal top and sound
enclosure with a clean, damp rag� A mild, all-purpose, nonabrasive cleaner may
be used�
• The drive socket can be cleaned using a cotton swab or toothpick�
• For Stealth blender models, the sound enclosure can also be removed for
cleaning, when necessary�
• Open the sound enclosure lid and use both hands to pull outward on the
lid at the pivot joints� This step will flex the plastic enough for it to spread and
clear its mounting tabs�
• The sound enclosure base can be removed in a similar fashion by pulling
outward at the base of the sound enclosure and flexing the outer walls
enough to clear the mounting tabs�
5.4 CLEANING TIPS AND CAUTIONS
• Do not use stiff bristled brushes or abrasive cloths/pads to clean the blender
base, jar or sound enclosure as this will dull or scratch the surface�
• Do not use a water jet of any kind to clean the motor base�
• NEVER submerge the motor base in water� Doing so will void the warranty�
• Avoid submerging blender jars for more than 5 minutes� Water penetration
through the lower jar seals will reduce the life of the jar�
SECTION 6: TROUBLESHOOTING
While we don’t expect you to have any problems with your blender, sometimes
failures do occur� Use the following guidelines to see if the problem is easily fixed
or requires service�
Bekijk gratis de handleiding van Blendtec STEALTH 895 NBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blendtec |
| Model | STEALTH 895 NBS |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 14999 MB |
