Blendtec STEALTH 895 NBS handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156/ 156

Afdrukken

Je bekijkt pagina 39 van 156

37

6�After the export is complete, remove the USB flash drive�

7�Insert the USB flash drive into a computer, and log in to the Blend Wizard

(my�blendtec�com)� Follow the instructions on the site to transfer the profile to

your account�

4.3.4 Blender Statistics

Blend Cycle Counts

You can review the total number of cycles run and the number of cycles run for

each button�

1�Press and hold buttons 2 and 4 for 1 second to enter the menu�

2�Use button 1 to scroll through the menu and then button 5 to select Cycle

Counts�

3�Use button 1 to scroll and see the number of cycles run in each category�

4�Press pulse button to cancel and return to the previous menu�

Note: The counts for pulse cycles increment on a different basis. Time accumu-

lates each time the pulse button is pressed. The count will increment after the

first 0.5 seconds of pulse time, and every 20 seconds of pulse time thereafter.

Diagnostic Error Log

You can review the diagnostic errors that have been logged on the blender�

1�Press and hold buttons 2 and 4 for 1 second to enter the menu�

2�Use button 1 to scroll through the menu and then button 5 to select Diagnostic

Counts�

3�Use button 1 to scroll and see the number of errors in each category�

4�Press pulse button to cancel and return to the previous menu�

Exporting Blender Statistics

Exporting blender statistics (cycle counts, errors, settings and firmware versions)

is a way to save diagnostic information, which Blendtec’s customer service and

repair experts will use if problems arise with your blender�

To export blender statistics to a USB drive, complete the following steps:

1�Locate the USB port on the bottom of the blender�

2�Plug the USB flash drive into the blender’s USB port�

Note: If the blender is in manual or automatic operation mode, the USB

flash drive menu will automatically load on the screen� If the blender is in

ENGLISH

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156/ 156

Bekijk gratis de handleiding van Blendtec STEALTH 895 NBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Blendtec (Blender)

Handleiding bekijken

Blendtec Stealth Nitro

Blender - handleiding

Andere merken in Blender