Blendtec STEALTH 895 NBS handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156/ 156

Afdrukken

Je bekijkt pagina 16 van 156

14

paused by pressing any button. If the Blend Cycle Pause function is

disabled, pressing any button disabled will simply stop a blend cycle.

5� Press the cancel/exit button to return to the previous menu�

Language

The menus on the Stealth’s display are available in three languages:

English, French, and Spanish�

To select a language, complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Settings from the menu by touching the

select button�

3� Use the scroll button and then select Language from the menu by touching the

select button�

4� Use the scroll button to find your desired language, then press select�

5� Press the cancel/exit button to return to the previous menu�

4.1.9 Blender Statistics

Blend Cycle Counts

You can review the total number of cycles run, the number of cycles run for each

control surface number, the number of times the pulse button has been used�

Also, for Stealth 875 only, you can review the number of times the slider control

bar has been used�

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Cycle Counts from the menu by touching

the select button�

3� Use the scroll button to see the number of cycles run in each category�

4� Press the cancel/exit button to return to the previous menu�

Note: The pulse count refers to pulse sets. For example, touching the pulse

button 5 times in a row will register as 1 pulse count. Touching the pulse

button, then a cycle number and then the pulse button will register as 2

pulse counts.

Diagnostic Error Log

You can review the diagnostic errors that have been logged on the blender�

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Diagnostic Counts from the menu by

touching the select button�

3� Use the scroll button to see the how many errors have occurred in each category�

4� Press the cancel/exit button to return to the previous menu�

Exporting Blender Statistics

Exporting blender statistics (cycle counts, errors, settings and firmware versions)

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156/ 156

Bekijk gratis de handleiding van Blendtec STEALTH 895 NBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Blendtec (Blender)

Handleiding bekijken

Blendtec Stealth Nitro

Blender - handleiding

Andere merken in Blender