Handleiding
Je bekijkt pagina 12 van 156
10
42� Pulse @ Speed 9
43� Disable Button
2. Custom Blend Cycles
3. CYCLE COUNTS
4. DIAGNOSTIC COUNTS
5. USB FLASH DRIVE
1� Import Profile
2� Export Active Profile
3� Export Counts
6. SETTINGS
1� Screen Standby
2� Blend Cycle Pause
3� Slider Lockout
4� Language� There are three
language options:
1� English
2� French
3� Spanish
7. BLENDER INFO
4.1.5 Selecting the Desired Profile
1� Press and hold the cancel/exit button for 3 seconds�
2� Select Profiles from the menu by touching the select button�
3� Use the scroll and select buttons to select either the Standard Profiles or
Custom Profiles category�
4� After selecting the Standard or Customer Profile category, you can scroll through
the profiles in the category and select the desired profile�
5� “Make this the active profile?” will appear on the screen� Press the select button
to confirm or the cancel/exit button to return to the previous menu�
4.1.6 Changing Programmed Cycle Buttons
Temporarily Change Cycle Buttons
To temporarily change cycle buttons when working in a selected profile,
complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Blend Cycles from the menu by
touching the select button�
3� Use the select button to choose the Standard or Custom Blend cycles�
4� Use the scroll button to find your desired cycle, then press select�
5� Enter the number you want to assign to the cycle, then press select�
Bekijk gratis de handleiding van Blendtec STEALTH 895 NBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blendtec |
| Model | STEALTH 895 NBS |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 14999 MB |
