Handleiding
Je bekijkt pagina 5 van 21
BLZ-SSRF20-4.3/BLZ-GDBEV20-4.5
General
•
Follow local codes: The appliance should be
installed in accordance with local electrical code
requirements. It should also be placed in a location
that is strong enough to support its total weight,
keeping in mind that it will weigh substantially more
when fully loaded than when empty.
• Do not attempt to repair or replace any part of your
refrigerator unless it is specifically recommended in
this manual. All other servicing should be referred
to a qualified technician. Consult repair manual
or owner’s guide before attempting to service this
product. All safety precautions must be followed.
• Before you plug the appliance into a power supply,
be sure to let it stand upright for at least 24 hours
to allow the compressor’s oils to settle.
•
Use two or more people to move and install
refrigerator. Failure to do so can result in back or
other injury.
•
The refrigerator must be installed with all electrical,
water and drain connections in accordance with state
and local codes. A standard electrical supply (115 V
AC only, 60 Hz), properly grounded in accordance
with the National Electrical Code and local codes
and ordinances is required.
•
Do not kink or pinch the power supply cord of
refrigerator.
•
The fuse (or circuit breaker) size should be 15 amps.
•
It is important for the refrigerator to be leveled in
order to work properly. You may need to make several
adjustments to level it.
•
All installation must be in accordance with local
plumbing code requirements.
• Make certain that the lines are not pinched, kinked
or damaged during installations.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl
inside the refrigerator.
Important Safety Instructions
•
Do not use solvent-based cleaning agents of abrasives
on the interior. These cleaners may damage or discolor
the interior.
•
Do not use this apparatus for other than its intended
purpose.
•
To ensure proper ventilation for your refrigerator, the
front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures
above 60°F (16°C) and below 90°F (32°C). This unit
must be installed in an area protected from the
element, such as wind, rain, water spray or drips.
• To prevent injuries, do not use accessories that are
not recommended by the manufacturer.
•
Before cleaning the appliance, disconnect power cord.
•
Do not store items of interest to children in cabinets
above the appliance or in the appliance. Children
climbing on the appliance to reach these items could
be seriously injured.
Severe Weather
• Storm and wind resistance: Some states are prone
to nor'easters and coastal storms, particularly in
coastal areas. Consider securing your fridge with
proper anchoring or bracing if it’s free-standing to
prevent it from tipping during high winds. Placing
the fridge in a sheltered area like a covered patio or
outdoor kitchen can also provide some protection
from severe weather.
Coastal considerations (if applicable)
•
Corrosion risks: If you're near the coast, salty air can
lead to corrosion on metal parts. Choose an outdoor
fridge made from 304 or 316 stainless steel, which
are more resistant to corrosion. Even with corrosion-
resistant materials, regular cleaning and maintenance
are essential to prevent rust from developing.
Bekijk gratis de handleiding van Blaze BLZ-GDBEV20-4.5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaze |
| Model | BLZ-GDBEV20-4.5 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2858 MB |
