Handleiding
Je bekijkt pagina 13 van 21
BLZ-SSRF20-4.3/BLZ-GDBEV20-4.5
Location and Installing Your appliance
Installing and setting up your Blaze 20-Inch Refrigerator
is crucial for optimal performance and longevity. Here's
a comprehensive guide to ensure proper installation,
especially in outdoor or varying environments.
Step 1. Unpacking and Initial Preparation
Remove all packaging: Carefully unbox the refrigerator,
removing all interior and exterior packaging materials.
Clean the Unit: Wipe the exterior with a soft, dry cloth and
the interior with a lukewarm wet cloth. Check Included
Parts: Ensure you have 3 shelves, instruction manual,
decoration cover for lock, decoration cap for lock, keys,
left hinge, left hinge screws, and decoration cap for hinge.
Step 2. Choosing the Right Location
Stable Surface: Place the refrigerator on a floor strong
enough to support it when fully loaded. Avoid Direct
Sunlight and Heat: Keep away from direct sunlight
and heat sources like stoves or radiators to prevent
increased electrical consumption. Consider Ambient
Temperature: Avoid extremely cold environments as they
may cause the appliance to perform improperly. Moisture
Considerations: Don't use near water sources like in wet
basements or near sinks.
Step 3. Proper Ventilation and Clearance
Freestanding design: The appliance is designed to be
freestanding. Built-in Requirements: If recessing or
building in, allow at least 2" clearance on sides and top.
Back ventilation: Ensure proper ventilation at the back
for compressor and condenser cooling.
Step 4. Pre-Power Setup
Upright settling: Let the appliance stand upright for
approximately 24 hours before connecting to power to
allow compressor oils to settle. Leveling: Adjust the four
leveling legs at the bottom to ensure the unit is perfectly
level.
Step 5. Electrical Connections
Proper outlet: Use a standard 115 Volt AC /60Hz electrical
outlet with three-prong ground. Grounding Importance:
Never remove or alter the third (ground) prong from
the power cord. Dedicated Circuit: Use a dedicated
circuit matching the appliance's voltage rating. Cord
Management: Secure the cord behind the unit to prevent
accidental injury or disconnection.
Step 6. Powering On and Initial Cooling
First power-up: After pluing in, allow the unit to cool
for 2-3 hours before placing contents inside. Temperature
Setting: Adjust the temperature control to your desired
setting (details not provided in original text).
Step 7. Safety and Compliance
Local codes: Install in accordance with local electrical
code requirements. Professional consultation: Consult a
certified electrician for any power or grounding questions.
Outlet Replacement: If you have a 2-prong outlet, have it
replaced with a grounded 3-prong outlet by a qualified
electrician.
Step 8. Maintenance and Care
Regular inspections: Periodically check the power cord
for damage and replace if frayed or damaged. Cleaning:
Regularly clean the interior and exterior. Door Seal: Check
and maintain the door seal to ensure proper closure and
efficiency.
Bekijk gratis de handleiding van Blaze BLZ-GDBEV20-4.5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaze |
| Model | BLZ-GDBEV20-4.5 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2858 MB |
