Blaupunkt TPMS 3.0 handleiding
Handleiding
Je bekijkt pagina 11 van 16
10
2. Sensor Pairing
a) Press & hold button “SET” to enter
Menu interface.
b) After hearing beeping sound, P1 will
appear.
c) Press & hold button “SET” to enter the
Sensor Pairing mode stored in display.
d) Short press “SET” to switch the
preferred position & entering the Sensor
ID (the tire symbol will move and the
original sensor ID will display).
3. Low Pressure
• Emits beeping alarm sound
4. High Pressure
• Emits beeping alarm sound
5. Air Leakage
• Emits beeping alarm sound
OPERATION INSTRUCTION
e) When the new Sensor ID left front
wheel is detected, it is stored automatical-
ly. Then, it will continue to next order.
Press button “ ” to exit setting interface.
(Pairing order : Front Left > Front Right >
Rear Right > Rear Left)
f) • External sensor
- Disassemble the external sensor from
the front left tire & reinstalled, for
sensor ID pairing activation.
• Valve sensor
- Releasing the air from tire continously
instead of intermittently, ensure that
the releasing process is not less than
8 second.
- Do not exceed the maximum pressure
of tire during inating.
• Ensure that there is only one of the tire with sensor
is activated during pairing, otherwise there is no
guarantee that the sensor ID that really needs to
be paired will be paired into the receiver.
• To cancel the current pairing process by pressing
return key, however pairing process cannot be
canceled
Bekijk gratis de handleiding van Blaupunkt TPMS 3.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaupunkt |
| Model | TPMS 3.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1040 MB |
