Black Decker BCD6SD handleiding
Handleiding
Je bekijkt pagina 29 van 92
Page 29
ENGLISH
TROUBLESHOOTING & WARRANTY
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
The dishes are
not drying
Improper loading
Load the dishwasher as suggested in the
directions.
Too little rinse-aid
Increase the amount of rinse-aid/Refill the
rinse-aid dispenser.
Dishes are removed too soon.
Do not empty your dishwasher immediately
after washing. Open the door slightly so
that the steam can escape. Begin unloading
the dishwasher only once the dishes are
barely warm to the touch. Empty the low
basket first. This prevents water from
dropping o dishes in the upper basket.
Wrong program selection
In short program the washing temperature
is lower. This also lowers cleaning
performance. Choose a program with a
long washing time.
Using cutlery with a
low-quality coating
Water drainage is more dicult with these
items. Cutlery or dishes of this type are not
suitable for washing in the dishwasher.
ERROR CODES
When some malfunctions come on, the appliance will display error codes to warn
you:
WARNING: If overflow occurs, turn o the main water supply before calling for
service.
If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
CODES MEANINGS POSSIBLE CAUSE
E1 Longer inlet time.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overflow. Some element of dishwasher leaks.
Ed
Failure of communication
between main PCB with TFT
PCB
Open circuit or break of wiring for the
communication.
Bekijk gratis de handleiding van Black Decker BCD6SD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Black Decker |
| Model | BCD6SD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9434 MB |