Black Box SW1046A handleiding
Handleiding
Je bekijkt pagina 26 van 28
877-877-2269 | BLACKBOX.COM
Page 26
Chapter 10: Traps Summary
10. Traps Summary
The A/B Switch can be configured to issue an SNMP trap when certain events occur. Use the “SET ALERTTYPE”
command to enable traps, and use the “SET MANAGER N X.X.X.X” command to specify the IP addresses of up
to 16 different NMS computers that you want to send these traps to (see Section 7 for details regarding these
commands). The following traps are generated by the A/B Switch. For additional details regarding theses traps,
and the SNMP MIB objects supported by the A/B Switch, please refer to the d1000.mib file supplied with your
switch.
generic trap 0 coldStart – issued when the unit is powered up, or after a RESET command
generic trap 4 AuthenticationFailure – issued when an invalid SNMP read/write community name is used
when attempting to access the A/B Switch
specific trap 6 SystemSwitchChange – issued in response to a switching action caused by a user initiated
command, front panel push button action, or remote dry contact closure
specific trap 8 AutoSwitchChange – issued when the A/B Switch automatically changes connection
states via the auto switch feature, or the auto recovery feature
Bekijk gratis de handleiding van Black Box SW1046A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Black Box |
| Model | SW1046A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3336 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1800 g |
| Breedte | 159 mm |
| Diepte | 205.7 mm |
| Hoogte | 64 mm |
