Black Box NBSALL8MGR handleiding
Handleiding
Je bekijkt pagina 28 van 44
724-746-5500 | blackbox.com
Page 28
NBS008A
724-746-5500 | blackbox.com
Chapter 7: Console Commands
SET SYSTEM A[B]
Sets the entire system (all connected racks) to position A or B.
GET RACK N
Displays status of rack N (1-255). This is the same as the status returned by the SNMP variable abRackCards. It displays a
16-character string showing the status of each port.
Rack Status: AAAABBAABBBBAABB
SET RACK N A[B]
Sets the entire addressed rack N (1-255) to position A or B.
GET PORT N
Displays the connection status of COMMON port N (NBS/NAC Gang Switch models) or Device port N (Sharing
Switch models) where N is the port number (1-4080). Switch port addresses are assigned using the formula N = 16*(rack address
– 1) + port#. The response will be “A” or “B”, or “X” (if a port is not present).
Port Status: B
Port Status: X
SET PORT N A[B]
Sets the addressed COMMON port N (or the addressd Device port N on Sharing Switch models) to position A or B. Switch port
addresses are assigned using the formula N = 16*(rack address – 1) + port# and have a range of from 1 to 4080.
GET EVERYRACK
Displays status of all racks (1 thru 255). This command displays the “Rack Status” for racks 1 thru 255, stopping when it reaches
rack 255 or encounters a “no response” from the requested rack. This is the same as the status returned by the SNMP variable
abRackCards. It displays a 16-character string showing the status of each port.
Rack 1 Status: AAAABBAABBBBAABB
Rack 2 Status: AAAABBBBXXXXXXXX
Rack 3 Status: no response
GET EVERYRACK N
Displays status of rack (1 thru N). This command displays the “Rack Status” for racks 1 thru N, stopping when it reaches rack N or
encounters a “no response” from the requested rack. This is the same as the status returned by the SNMP variable abRackCards.
It displays a 16-character string showing the status of each port.
Rack 1 Status: AAAABBAABBBBAABB
Rack 2 Status: AAAABBBBXXXXXXXX
Rack 3 Status: no response
GET POWER N
Displays the status of the power supplies for rack N. If only one power supply is being used to power the rack or if one of the
supplies in a dual-powered rack is down, the response will be “One Supply Down.” If two supplies are used and both are
operational, the response will be “Two Supplies.”
Power Status: One Supply Down
Power Status: Two Supplies
Bekijk gratis de handleiding van Black Box NBSALL8MGR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Black Box |
| Model | NBSALL8MGR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4641 MB |
