Bissell TurboClean Pet XL 3738 handleiding

Stoomreiniger

Bissell

20 pagina's

PDF beschikbaar

Handleiding

BISSELL.com 9

Problem Possible Cause Remedies

Reduced

spray OR

no spray

Clean water tank may be

empty.

Refill tank.

Clean water tank may not be

seated completely.

Turn power off. Remove and reseat tank.

Pump may have lost prime in

hose cleaning mode.

Hold end of hose below water level in tank to

prime.

No spray

through

hose & tool

The hose to machine is

not primed.

Turn off and unplug the machine. Remove

nozzle from foot. Insert pen in black cylinder

next to screw. Wait for water bubbles, remove

pen. Reassemble nozzle and hose.

Loss of suction

power

Tanks may not be seated

properly.

Reseat both tanks so they fit properly.

Dirty water tank is full. Empty dirty water tank.

Rubber tab on dirty water tank

is not sealed tight.

Check rubber tab on dirty water tank and press

firmly on all edges to secure tightly.

Accessory hose door not

closed tightly.

Check accessory hose door and make sure it is

closed tightly – it should be locked into place.

Nozzle not installed correctly. Remove and reinstall nozzle.

No power Outlet may not be active.

Try plugging in a different device that uses a

grounded outlet to test for power from outlet.

Leaking dirty

water tank

Tank ring not installed

properly.

Remove tank. Remove and reinstall tank ring.

Troubleshooting

Warranty

Limited 2-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for

complete warranty information.

Bekijk gratis de handleiding van Bissell TurboClean Pet XL 3738, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.