Bissell ProHeat 2X Revolution 1858F handleiding

Stofzuiger

Bissell

20 pagina's

PDF beschikbaar

Handleiding

Problem Possible causes Remedies

Reduced

spray OR

no spray

Clean water tank may be empty

Refill tank

Clean water tank may not be

seated completely

Turn power OFF. Remove and

reseat tank

Pump may have lost prime in

hose cleaning mode

Hold end of hose below water level

in tank to prime

Loss of

suction

power

Tanks may not be seated properly Pick up both tanks and reseat them

so they fit properly on the unit

Dirty tank has picked up

maximum amount of dirty water

and has reached full line

Empty dirty tank

Clean water tank is empty Check fluid levels in the clean water

tank. Refill the tank if it is empty

Rubber tab on dirty water tank is

not sealed tight

Check the rubber tab on the dirty

water tank and press firmly on all

edges to secure it tightly (see step

4 on page 13 for detail)

Accessory hose door may not be

closed tightly in place

Check the accessory hose door

and make sure it is closed tightly by

pushing down to lock into place.

Nozzle may be clogged from pet

hair or debris

Use the nozzle clean out tool

and follow steps on page 13 for

“Cleaning Nozzle”

Troubleshooting

WARNING

To reduce the risk of electric shock, turn power switch o and disconnect plug from

electrical outlet before performing maintenance or troubleshooting checks.

www.BISSELL.com

Bekijk gratis de handleiding van Bissell ProHeat 2X Revolution 1858F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.