Bissell CrossWave HydroSteam 3517F handleiding

Stoomreiniger

Bissell

12 pagina's

PDF beschikbaar

Handleiding

8 global.BISSELL.com

Note: Empty dirty water tank before beginning and be sure the strainer and filter stay dry. Use the

Clean Out Cycle after each use.

1. Fill clean tank with water and

formula up to the Clean Out

fill line. Optional: With the unit

removed from the tray, add

2 fluid ounces of FreshStart™

formula to the Clean Out Tray.

2. Plug machine into a

properly grounded outlet and

place on the tray. The Clean

Out Cycle button on the handle

will light up blue when ready.

3. Press the Clean Out Cycle

button to begin.

Note: For best results, never

run the cycle more than twice.

1. Press the button on the top

of dirty water tank, grab the

front handle and pull out.

2. Hold top of tank near the

sides of the filter and pull up to

remove. Pull strainer stem and

remove from the tank. Throw

debris into the trash.

3. Pour dirty water into

a utility sink or similar

waste-water receptacle.

Thoroughly rinse the tank.

WARNING To reduce the risk of ﬁre, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

Using the Clean Out Cycle

Emptying the Dirty Water Tank

Bekijk gratis de handleiding van Bissell CrossWave HydroSteam 3517F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.