BirdDog X4 Ultra handleiding
Handleiding
Je bekijkt pagina 26 van 30
7. TRACKING CONFIG
USER MANUAL
TRACKING CONFIG
Tracking
Tracking Mode
Figure Size
Select Item
Change Value
[Menu] Exit
Off
Presenter
Full
COMMUNICATION SETUP
Protocol
V_Address
V_AddrFix
Net Mode
Baudrate
Select Item
Change Value
[Menu] Exit
VISCA
1
Off
Serial
9600
Configures the camera's AI tracking capabili-
ties. Please see the AI Tracking section of this
manual for more information
• Tracking (Off/On): Enables AI-based
subject tracking.
• Tracking Mode (Presenter/Zone): Sets
whether the camera tracks a moving
presenter or is triggered from a defined
zone.
• Figure Size (Full/Half Body/Close Up/Cus-
tom): Sets the frame size for tracking.
Custom allows manual frame size definition
for different shot types.
8. COMMUNICATION SETUP
Configures remote control protocols and
network settings. Note that the camera will
always respond to VISCA-IP and NDI proto-
cols.
• Protocol (VISCA/PELCO-D/PELCO-P/Au-
to): Sets the communication protocol used
for camera control.
• V_Address (1): Sets the VISCA device
address.
• V_AddrFix (Off): Enables or disables fixed
address mode for VISCA.
• Net Mode (Serial): Defines communication
over a serial interface.
• P_D Address/P_P Address: Sets PEL-
CO-D/P addresses for communication.
• Baudrate (9600): Sets communication
speed; higher baud rates are faster but
may reduce stability.
9. RESTORE DEFAULT
Resets all settings to factory defaults, useful
for troubleshooting or restoring initial settings.
24
Bekijk gratis de handleiding van BirdDog X4 Ultra, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | X4 Ultra |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 3012 MB |
