BirdDog P4K handleiding
Handleiding
Je bekijkt pagina 44 van 68
40
B/W Balance
Adjust the balance between contours in black on the low brightness side of the spectrum and contours in white on
the high brightness side. Choose from TYPE 1 to TYPE 5. The ratio of contours in black is higher for TYPE1 while the
ratio of contours in white is higher for TYPE 5.
Limit
Choose the maximum value for the amount of contour emphasis in black on the low brightness side of the spectrum
and in white on the high brightness side. Choose a value from 0 to 7.
Highlight Detail
Adjust the level of contour added to brightly lit objects. Choose a value from 0 to 4. Adjust this when you want to
emphasize the contour of a brightly lit object in a bright background.
Super Low
Emphasizes contours in the super low range. Choose a value from 0 to 7. The greater the value, the greater the
contour emphasis. Contrast and resolution increase.
Picture Tab
2D/3D NR
2D Noise Reduction is a method of
reducing noise within an image by
comparing the image from frame to frame,
removing variations that do not appear
in each frame. 3D Noise Reduction is a
method of reducing noise by comparing
variances within the same frame, as well
as comparing frame to frame. This will
often reduce noise without leaving trails
behind a moving object.
Flip
Flips the image upside down for ceiling mounted cameras. Select from upright mode (OFF) or ceiling mount (ON).
Mirror
Displays a mirror image of the video image.
IR Cut Filter
An IR (infrared) cut lter can be disengaged for increased image sensitivity in low light conditions. The lter
will automatically engage depending on the ambient light, allowing the camera to be eective in day/night
environments. When the mode is set to NIGHT, a monochrome (black and white) image will be displayed.
Chroma Suppress
The chroma suppress mode can be engaged for low light conditions when color noise may be particularly noticeable.
You can set the brightness from OFF, LOW, MID, HIGH in each mode of the variable gamma modes.
Highlight Compensation
Highlight Light Compensation attempts to adjust AE and AF to compensate for when high intensity spot lights are
detected.
Stabilizer (available on 30X zoom)
This function can reduce image blur caused by camera movement. The correction eect works best at vibration
frequencies of around 10 Hz and may not be as eective in conditions of high frequency vibration. In such high
frequency vibration conditions, turn the image stabilizer function o.
The image stabilizer function uses the digital zoom methodology and may result reduced angle of view and
resolution.
Bekijk gratis de handleiding van BirdDog P4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | P4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8904 MB |
