BirdDog P4K handleiding
Handleiding
Je bekijkt pagina 43 van 68
39
ATW (Auto Tracking White Balance): Auto Tracking White balance (2000K to 10000K), allows the camera to ad-
just the white balance according to the temperature of the light source illuminating the subject.
Manual 1 :This user mode allow you to manually set the color balance parameters.
Below are the various parameters for these white balance modes.
Cam Red/Blue Gain
Sets the intensity of red and blue colors of the image.
Cam Color Temp
Sets the color temperature of the image in degrees Kelvin.
Speed (white balance speed)
You can adjust the speed at which the camera reaches the white convergence point when AUTO is chosen. Choose
a value from 1 - 5, from slow to fast.
Oset
The white convergence point can be shifted when WHITE BALANCE mode is AUTO or ONE PUSH. The range is
from –7 to 0 to +7. White balance is shifted toward blue when a negative value is chosen, and it is shifted toward
red when a positive value is chosen.
Matrix (Color Matrix)
You can emphasize or weaken a specic color region while keeping the white convergence point unchanged.
When you turn this ON, the following items are displayed for adjustment.
Detail Tab
Mode
Auto: Contour correction signal is automatically added.You can set the volume of the contour correction signal.
Choose a LEVEL value from 0 to 15. The greater the value, the stronger the contour correction signal.
Manual: Congure the following settings manually.
Bandwidth
Set the bandwidth for signals undergoing contour emphasis. You can choose from DEFAULT,
LOW, MIDDLE, HIGH, and WIDE. For example, when you choose MIDDLE, the middle range of the signals is elevated,
and contours in that middle range are emphasized.
Crispening
Choose the neness of the objects subject to contour correction with contour correction signals. Choose a value
from 0 to 7. When you choose a higher value, minute contour correction signal elements are removed, and only the
high level contour correction signals are left,which reduces noise. When you choose a lower value, minute contour
correction signal elements are added to the picture, increasing noise.
H/V Balance
Choose the ratio for horizontal and vertical contour correction signal elements. Choose a value from –2 to 0 to +2.
When you choose a higher value, the horizontal contour correction elements become greater compared to the
vertical elements.
Bekijk gratis de handleiding van BirdDog P4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | P4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8904 MB |
