BirdDog P4K handleiding
Handleiding
Je bekijkt pagina 38 van 68
34
AV Setup
Device Settings
Video Processing Mode
You can choose Low Latency mode to improve performance in applications where latency may be an issue. In this
mode, SDI and HDMI outputs, as well as the OSD (On Screen Display) are disabled. Click the Device Restart button
when changing this setting. Video formats available in this mode are 2160p30, 29.97, 25, 24, 23.97 and 1080p60,
59.94, 50.
Audio Output Select
Loop: Audio from the Audio In port, for example, from a connected microphone, is directed to the Audio Out port
for monitoring.
Comms: Audio from NDI
®
stream is directed to the audio out for camera operator comms. You'll need software
such as BirdDog Comms Lite/Pro to use this function.
Audio In / Out Gain
Controls for adjusting the audio in/out gain.
Device Restart
Restarts the NDI
®
stream. This may be necessary after changing key image settings e.g., resolution and Low latency
mode.
NDI Encode Settings
Bitrate Management
Birddog Devices allow you to set your target NDI® output bitrate. This allows you to select a compression ratio that
is more ecient for your networking infrastructure (lower bandwidth) or higher image quality for critical footage.
The scale allows you to select the range of 60 Mbps - 360 Mbps.
Bekijk gratis de handleiding van BirdDog P4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | P4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8904 MB |
