BirdDog P4K handleiding
Handleiding
Je bekijkt pagina 17 van 68
13
Powering P4K
P4K can be powered in two ways.
• PoE+ (Power over Ethernet)
PoE+ is a convenient way to power P4K as it allows both data and power to be sent through the same
standard Ethernet cable. The network switch must support PoE+ (802.3at).
• DC Connection
Located at the rear of the P4K is a 12VDC connection port. Use only
the DC power adaptor (JEITA type4) supplied with the unit.
WARNING
Do not attempt to manually move the camera head when the device is powered up. Doing so may damage the
camera.
Thermal Management
Although the camera is equipped with a fan, the entire enclosure is designed to dissipate heat. The main processor
is capable of operating up to 100º C / 212º F. Various factors can aect how much heat the camera will produce,
and it is normal for it to feel warm to the touch. In extreme circumstances (a hot day/direct hot sun) it is advised to
power P4K via DC as this produces less heat than PoE.
Bekijk gratis de handleiding van BirdDog P4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | P4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8904 MB |
