Biostar J4125NHU handleiding

51 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 51
8 | Chapter 2: Hardware installaon
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot
such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vercally and rmly into the slot unl the retaining clips snap back in
place and the DIMM is properly seated.
Note
»
  IftheDIMMdoesnotgoinsmoothly,donotforceit.Pullitallthewayoutandtryagain.
Memory Capacity
DIMM Socket Locaon DDR4 Module Total Memory Size
DIMMA1 4GB
Max is 8GB.
DIMMB1 4GB
Dual Channel Memory Installaon
Please refer to the following requirements to acvate Dual Channel funcon:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DIMMA1 DIMMB1
Disabled O X
Disabled X O
Enabled O O
(O means memory installed, X means memory not installed.)
Note
»
  Wheninstallingmorethanonememorymodule,werecommendtousethesamebrandand
capacitymemoryonthismotherboard.

Bekijk gratis de handleiding van Biostar J4125NHU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBiostar
ModelJ4125NHU
CategorieNiet gecategoriseerd
TaalNederlands
Grootte7848 MB

Caratteristiche Prodotto

Breedte170 mm
Diepte170 mm
ProcessormodelJ4125
Aantal processorkernen4
Grafische adapterIntel® UHD Graphics 600