Beverage-Air UCRF48AHC handleiding
Handleiding
Je bekijkt pagina 10 van 34
User Manual for UCRF Refrigerator Freezer Beverage Air
Rev. 04/25Beverage Air10
This is a cord-connected unit, and must be connected to its own dedicated power supply. Check the dataplate on the
machine to conrm the voltage and per the dataplate use the correct fuses or HACR circuit breakers.
Note: Do not connect to GFI / GFCI outlets. Connection to that type of outlet can result in product loss due to
unsafe cabinet temperature when GFI device trips from moisture.
Power Cord
This 115 volt model is equipped with 2 cords and 5-15P
plugs.
If the power cord becomes damaged, it must be replaced
with the identical cord.
Follow All National and Local Codes
This unit must be grounded. Do not use extension cords
and do not disable or by-pass ground prong on electrical
plug.
Initial Start Up
Plug the power cord into the proper power supply.
The cabinet will soon begin to blow warm air out of the
top area, and cool air will ow from the inside blower.
The cabinet temperatures have been set at the factory
and should not need adjustment, however if changed, the
standard refrigerator setting is 38º F., while the standard
freezer setting is 0
o
Care must be taken whenever moving or servicing the
unit. The refrigerant is contained in a sealed system, but if
released it may be ammable.
ELECTRICAL
Bekijk gratis de handleiding van Beverage-Air UCRF48AHC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Beverage-Air |
| Model | UCRF48AHC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5687 MB |
