Beverage-Air RID18HC-HG handleiding

29 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 29
User Manual for RID Refrigerators Beverage-Air
Rev. 04/25Beverage-Air10
This is a cord-connected unit, and must be connected to
its own dedicated power supply. Check the dataplate on
the machine to conrm the voltage and per the dataplate
use the correct fuses or HACR circuit breakers.
Note: Do not connect to GFI / GFCI outlets. Connection to that type of outlet can result in product loss due to unsafe
cabinet temperature when GFI device trips from moisture.
Power Cords
This 115 volt model is equipped with a power cord, with a
5-15P plug.
If a power cord becomes damaged, it must be replaced
with the identical cord.
Follow All National and Local Codes
This Unit Must Be Grounded. Do not use extension cords
and do not disable or by-pass ground prong on electrical
plug.
Initial Start Up
Plug the power cord into the proper power supply.
The cabinet will soon begin to blow warm air out of the
back area, and cool air will ow from the inside blower.
The cabinet temperatures have been set at the factory
and should not need adjustment, however if changed, the
standard refrigerator setting is 38º F.
Cautions
Care must be taken whenever moving or servicing the
unit. The refrigerant is contained in a sealed system, but if
released it may be ammable.
ELECTRICAL

Bekijk gratis de handleiding van Beverage-Air RID18HC-HG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBeverage-Air
ModelRID18HC-HG
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4553 MB