Beverage-Air PHI1-1S handleiding
Handleiding
Je bekijkt pagina 25 van 29
User Manual for PH Warming Cabinets Beverage-Air
Rev. 04/25 Beverage-Air 25
Product load burning
or boiling
Product load is too close to heating
element
Rearrange product load so that it is not too close
to heating element(s).
Controller setpoint is too high Adjust controller setpoint to a lower setting.
Examples of holding times and temperatures are
within the operator's manual.
Product load becoming
soggy
Too much humidity or moisture inside
cabinet
Adjust or close internal venting/damper knob to
control moisture. Normally the internal venting/
damper should be open for products such as
breaded meats, sh, etc
Product load held too long time. Hold product load inside cabinet per recommended
time. Examples of holding times and temperatures
are on page 13.
Cabinet is noisy Part(s) loose Locate and tighten loose part(s)
Cabinet is not level Level cabinet by adjusting legs or shimming caster
Door won't close Hinge(s) may need slight adjustment Apply shim(s) to hinge until door seals properly
Controller Alarm &
Error
---- Refer to either pages 17 or 21 of manual for codes.
If problem( s) persist, contact the factory for
further assistance
Bekijk gratis de handleiding van Beverage-Air PHI1-1S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Beverage-Air |
| Model | PHI1-1S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3867 MB |
