Beurer LV 500 PureFlow handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586/ 86

Afdrukken

Je bekijkt pagina 14 van 86

14

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.

Device

1

Display with control panel

2

Air outlet

3

Ambient air indicator

4

Air intake

5

PM 2.5 fine dust particle sensor

6

Connection socket for mains adapter

7

Filter

8

Mains adapter

Display with control panel

9

Automatic symbol (automatic mode is active)

10

7-segment indicator

11

Filter indicator (lights up when the filters need to be replaced)

12

Temperature symbol

13

Fan setting symbol

14

Timer symbol

15

Oscillation symbol

(lights up when the rotation is active)

16

Child symbol (lights up when child mode is on)

17

Sleep symbol (lights up when sleep mode is on)

18

Nature mode (lights up when nature mode is on)

19

Basic mode (lights up when basic mode is on)

20

+ / - buttons

(to adjust the fan setting and timer)

21

Oscillation button

(to switch the rotation on/o)

22

Timer button

(to activate the timer)

23

ON/OFF button

(to switch the device on/o)

24

Mode button

(to switch between modes)

Remote control

25

+ / - buttons

(to adjust the fan setting)

26

Timer button

(to adjust the timer)

27

ON/OFF button

(to switch the device on/o)

28

Oscillation button

(to switch the rotation on/o)

29

LED button

(to switch all indicator lights on/o)

30

Mode button

(to switch between modes)

6. USAGE

6.1 Setting up the device

1. Open the cardboard packaging.

2.

Carefully remove the device from

the cardboard packaging.

3. Remove all the packaging mate

-

rials and the transport secur-

ing tapes from the device. Then

check the device for damage.

4.

Remove the filters

7

from the

device (see “Changing the filters”

section) and take them out of the

plastic covering film. Then re-in-

sert the filters

7

into the device.

5.

Place the device on a level and

stable surface to prevent vibra-

tions and noise.

6. Set up the device in your imme

-

diate vicinity. Leave a clearance of

at least 30 cm on all sides around

the device.

7.

Pull out the battery strip on the

remote control.

 CAUTION

Make sure that the air intake

4

and air outlet

2

are never blocked.

6.2 Switching on the device

1. Plug the mains cable of the mains adapter

8

into the connection

socket

6

on the rear of the device. Only then may the mains

adapter be plugged into the socket. The ON/OFF button

23

appears in the control panel.

2. To switch on the device, press the ON/OFF button (either on the

remote control

27

or on the control panel

23

). A beep sounds when

the device is switched on. After being switched on, the device runs

automatically at the lowest fan speed setting and in basic mode

19

. The ambient air indicator

3

switches on automatically. After

approx. 30 seconds, the ambient air indicator

3

will indicate the

current air quality using a colour, which corresponds to the concen-

tration of particles in the ambient air around the device.

Ambient air indica-

tor colour

Air quality PM 2.5 value in µg / m³

blue good ≤ 12

yellow acceptable 12.1 – 55.4

red very poor ≥ 55.5

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586/ 86

Bekijk gratis de handleiding van Beurer LV 500 PureFlow, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Ventilator