Bertazzoni PRO95I2EART handleiding
Handleiding
Je bekijkt pagina 9 van 31
9
You now have 3 seconds to select the heating setting of your choice. Once a setting
between 1 and 9 has been selected, "A" and the chosen setting will flash in
alternation on the display. '
While the heating accelerator is in operation, the heating level can be increased at
any time. The "full power" time will be modified accordingly. If the power is reduced
by turning the knob anticlockwise, option "A" is automatically deactivated.
Power Function The power function allows the user to operate each heating zone continuously at the
maximum power for a time of no more than 10 minutes. This function can be used, for example, to bring a
large amount of water to the boil in a hurry, or to turn up the heat under meat.
Turn the knob clockwise and set heating level 9, then use the knob to set the "P"
position and release it. "P" appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9
setting and the "P" disappears.
However, the power function can be turned off at any time by reducing the heating
level. .
When the power function is selected for one heating zone (e.g. the left front zone),
the power absorbed by the second zone (Ieft rear zone) might be reduced to supply
the maximum available energy to the first zone.
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the
function is switched off.
Bridge Function 2 cooking zones bridged behave like one cooking zone and can also be controlled
like only one. For this range, the bridge can only be activated vertically on the octa
inductors. To activate it, turn both concerned knobs to the right until the stop during 2
s. On the rear display you will have the bridge indication and on the front display you
choose your power level.
Time limitation system
Power level
Operating time limitation in Min.
1
520
2
402
3
318
4
260
5
212
6
170
7
139
8
113
9
90
Limitation power: (only for induction hob)
1. Make sure that all knobs are on position ‘0’
2. Turn the knob front left and front right simultaneously to leftoverwind positon and
hold for 3 s. then release both knobs.
. the two upper displays now show the power per phase.
. the two lower display show the number of phase(e.g. “2 P” for 2-phase connection)
3. Turn the knob front right X1 to left overwind position to toggle through the offered
settings.
4. Perform no action for 10 s. => the setting which is displayed will be saved
permanently. The cooktop goes to OFF mode and can be operated regularly.
Bekijk gratis de handleiding van Bertazzoni PRO95I2EART, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | PRO95I2EART |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4049 MB |
