Bertazzoni P885IC2G5NE handleiding
Handleiding
Je bekijkt pagina 9 van 92
9
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
Power Booster and Double Power Booster function
Power Booster [ P ] and Double Power Booster [ ] grant a boost of Power to the selected
heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Power.
This is foreseen for example to heat up rapidly big quantities of water, like nuddles
• Start up / Stop the Power Booster:
Action Control panel Display
Start up the Power Booster Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Stop the Power Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
• Start up / Stop Double Power Booster
Action Control panel Display
Start up the Power Booster Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Start up Double Power Booster Re-press key [ P ] [ and P ]
Stop the Double Power Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Stop Power Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
• Power management:
If the selected heating levels for both zones exceed the maximum available amount of power, the
power management function is automatically reducing the power from one of these zones. The
display of this zone is first blinking; the level is then automatically reduced to the highest suitable
position.
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 8 ] and blinks
Bekijk gratis de handleiding van Bertazzoni P885IC2G5NE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | P885IC2G5NE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9242 MB |
