Bertazzoni P604I1M30NP handleiding
Handleiding
Je bekijkt pagina 66 van 140
TROUBLESHOOTING
BEHAVIOUR POSSIBLE CAUSES
The hob will not turn on
There is no power supply or it could be interrupted (for
example, blown fuse)
The hob does not heat up
DEMO mode is activated, see section SERVICE MENU
The letter L appears on the display
Child lock is activated - see relevant section CHILD LOCK
No pan symbol The pan has been removed from the cooking zone
Symbol A alternates with the power level The automatic cooking system has been set
The power of the chosen cooking zone cannot be selected
The pan has not been recognised (it may have been
positioned incorrectly, it may not be suitable for induction
cooking or its diameter may be too small
The power level selected is higher than the maximum
power level set for the hob
Residual heat symbol does not light up
The zone just used for cooking has not reached a high
temperature
The cooking zones change power autonomously
See section POWER MANAGEMENT
When a cooking zone is switched on, another one switches
off
See section POWER MANAGEMENT
A cooking zone or the entire hob turns off automatically
The hob is overheated, check that there are no
obstructions to the lower cooling system (e.g. bulky
material inside a drawer under the hob)
If the problem persists, contact customer support
Food does not heat up in the expected time
Although the pan is compatible with induction cooking, it
conducts heat poorly
The pan is much smaller than the cooking zone and only
receives part of the possible power
When the hob is on, you can hear a slight ticking sound
The noise is due to the automatic pan sensor function (see
relevant section)
After switching off the hob, you can hear noises
The cooling fan works until the electronic components have
cooled down completely, after which it switches off
automatically
The control panel becomes warm to the touch
A pan that was too big was placed in the front cooking
zones near the control area
The food in the pan alternates between boiling and not
boiling
It is absolutely normal at the lowest power levels (below
level 6) (see section POWER MANAGEMENT
The cooking platform has dedicated error codes for quick and efficient diagnostics. The Lite Slider shows the error codes
on the 7-segment displays of the cooking zones.
An error code always begins with the letters E... or ER..., depending on the electronic component that generated the
error:
• Error codes that begin with E... refer to a specific zone or component.
• Error codes that begin with ER... refer to the entire hob.
Before calling customer service, make sure that the appliance is connected correctly; the following cases are not covered
by the warranty
• Damage caused by improper use, storage or maintenance.
• Damage caused by unauthorised disassembly and repair.
• Damage caused by improper use.
66
Bekijk gratis de handleiding van Bertazzoni P604I1M30NP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | P604I1M30NP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11542 MB |
