Bertazzoni HER95I2EAVT handleiding
Handleiding
Je bekijkt pagina 40 van 40
40
proximity with the oven elements. Foil should not be used to line the oven cavity
or grill pan This can cause overheating, buckling and cracking of the enamel
surfaces.
- Silicon oven mats (sometimes used to reduce cleaning) must not be placed on
the floor of the oven when the base element
IS
in use (e.g. when using Bottom
Ele
ment only or Conventional Cooking. The silicon oven mats will damage
the
en
amel interior
.
Doors and door seals
- The
fit and general state of the oven doors and seals can affect temperatures in
the oven. Clean the oven seals regularly and check them for splits and tears Do no
t
lea
ve oven cleaning materials in prolonged contact with the seals as this
will
sh
orten their life span.
- Doors and their handles should not be used to move the cooker. This can pu
ll
th
e door and its hinges out of
position
and cause heat loss or uneven heating of the
ovens
.
Induction cookers
The induction hob uses a sophisticated zone management system which controls
the level of power available to each of the zones to prevent over loading of the
circuits and the power supply to the appliance.
The system automatically reduces the maximum power available to any one zone
w
hen the other zones are being used at the same time at a high power setting If the
power level ls reduced on one zone. the power can be increased on other zones.
If several zones are used on maximum power at the same time, it is possible that
an
other zone may not operate. This can be managed by reducing the power level on
one of the other zones.
As an example. Using the front left and back left zones on level 9, would not allow
th
e middle zone to operate; this would register as an inactive zone with a line in the
middle of the display. Turning the back left zone down to level 8 would allow the
middle zone to operate up to level 7.
100x60 triple oven levelling feet
The cooker is equipped with 4 leveling feet that can be adjusted up or down using
t
he Allen key supplied through the centre of the toot.
To level the cooker
Start by adjusting the rear left foot to the he
ight of the worktop (or the final required
height of the cooker) as this foot is not accessible from the front of the appliance.
Place the cooker in position. The other 3 legs are accessible from the front of the
appliance. Remove the front plinth and storage drawer to access the 3 adjustable
legs; use the Allen key tool through the middle of the leg to make the required
height and leveling adjustments.
Bekijk gratis de handleiding van Bertazzoni HER95I2EAVT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | HER95I2EAVT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4815 MB |
