Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

56

Programming the Pattern Combination

Example: Stitch pattern 56, 58 and 57 (mode 3)

Select pattern 56 (mode 3).

Press the memory button, and the stitch pattern 56 is memo-

rized.

The LCD display shows only 1 character at a time. The

memorized stitch pattern is shifted to the left side of the dis-

play and the cursor blinks.

Select pattern 58 (mode 3). Press the memory button.

Select pattern 57 (mode 3). Press the memory button.

A pattern combination series will be sewn. If you press the

auto-lock button while the machine is sewing, the machine

will sew the current pattern and locking stitch, then stop

automatically.

Programming Auto-thread Cutting

Example: Auto-thread Cutting with Patterns 56, 58 and 57 (mode

3)

Refer to procedure to on “Programming the Pattern

Combination” above to enter the stitch patterns 56, 58 and

57.

Press and hold the thread cutter button until the thread

cutter mark appears on the LCD display.

Start to sew. A pattern combination series will be sewn and

the machine will trim the threads automatically after locking

stitch.

PLEASE NOTE:

Stitch patterns can be memorized up to 50 patterns.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.