Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

46

• Adjusting the evenness of the darning

Correct the evenness of the darning as follows:

Press the stitch length button , to change the eveness.

If the right side of the stapler is lower than the left side, press the

“ “ button to even the darning.

If the left side of the stapler is lower than the right side, press the

“ “ button to even the darning.

Darning Stitch

Stitch pattern: Mode 2 : 28

Thread tension: 3 - 6

Presser foot: Buttonhole foot with slide

• Starting to sew

Pull the button holder to the back.

Place the garment under the foot. Press the needle stop up/

down button twice. Move the fabric to the left to draw both

threads under the foot.

Lower the presser foot. Start the machine. The machine will

lock stitch, sew 16 rows of darning, lock stitch again and

stop automatically.

Turn the fabric and repeat sewing in different direction.

The machine will trim the threads at the end of sewing auto-

matically if the thread cutter sign is indicated on the

LCD display (Refer to page 13).

Button holder

Starting point

3/4˝ (2 cm)

9/32˝ (0,7 cm)

• Sewing a shorter darning

To sew a darning shorter than 3/4˝ (2 cm), ﬁrst stop the machine

after sewing the required length , then press the reverse sew-

ing button .

The required length has been determined.

Start the machine again and continue sewing until the machine

stops automatically.

Reverse sewing button

Required length

Starting point

• Sewing a same-sized darning

Simply start the machine to sew another darning at the same size.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.