Bernette b38 Yaya Han Edition handleiding

Naaimachine

Bernette

70 pagina's

PDF beschikbaar

Handleiding

 25

Setting Mode

To enter the setting mode, press and hold the memory button and

turn the power switch on until the setting mode screen appears.

In this mode you can set the following machine functions.

• Buzzer sound setting

The buzzer sound can be turned on or off using the buzzer sound

setting.The default buzzer sound setting is “ON”.

Enter the setting mode.

To turn off the buzzer sound, press the cursor. The “oF”mark

will blink. Press the memory button to turn the buzzer sound

off.

* Caution buzzer sound cannot be turned off.

• Permanent needle stop position setting

You can set the needle stop position to up or down when the

machine stops.

Enter the setting mode. Press the mode button to enter the

up/down needle position setting.

The default up/down needle position setting is “dn”.To

change the needle position, press the cursor. The “UP” mark

will blink.Press the memory button to change the up/down

needle position to “UP”.

• Auto-off timer

The machine will be turned off if you do not use the machine within

the time period set by this timer.

The auto-off timer can be set from 1 to 12 hours.

The default auto-off timer setting is 7 hours and “07” sign appears

on the screen.

Enter the setting mode. Press the mode button 2 times to

enter the auto-off timer setting.

Press cursor to increase or decrease the setting value.If you

wish to turn off the timer, press and hold the cursor button

until “oFF” sign appears on the screen.

Press the memory button to apply the setting.

PLEASE NOTE:

The auto-off timer is available in EU countries and some

regions which use 200 - 240 voltage standards.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.