Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

 15

Attaching and Removing the Presser Foot

Holder

• Removing Presser foot holder

Remove the setscrew by turning it counterclockwise with

a screwdriver.

• Attaching Presser foot holder

Match the hole in the presser foot holder with the threaded

hole in the presser bar.

Fit the setscrew into the hole.

Tighten the setscrew by turning it clockwise with the

screwdriver.

Setscrew

Presser foot holder

Hole

Threaded hole

CAUTION:

Turn OFF the power switch before removing or attaching

the presser foot holder.

Changing the Presser Foot

• Removing the presser foot

Raise the needle to its highest position by turning the handwheel

counterclockwise. Raise the presser foot, and press the lever on

the back of the presser foot holder.

Lever

• Attaching the presser foot

Place the desired presser foot, so that the pin on the foot lies just

under the notch on the presser foot holder.

Lower the presser foot lever to lock the foot in place.

Notch

CAUTION:

Turn OFF the power switch before changing the foot.

Always use the proper foot for the selected pattern.

The wrong foot can cause the needle to break. Each foot

is marked with an identiﬁcation letter.

Identiﬁcation letter

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.