Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

 13

• Needle stop up/down button

Press the needle stop up/down Button to bring the needle up

or down.

• Thread cutter button

Press the thread cutter button to trim the threads after sewing.

The thread cutter mark will blink , while the machine cuts the

threads.

You can continue sewing without pulling the bobbin thread up

after trimming the threads.

To trim the threads automatically after sewing, select the desired

stitch pattern, then press and hold the thread cutter button until

the thread cutter mark appears .

The machine will trim the threads automatically after the locking

stitch then stop when the Reverse sewing stitch or autolock but-

ton is pressed, or a pattern has the auto-lock stitch programmed.

• Twin Needle button

Press the twin needle button when using a twin needle. The

twin needle mark will appear when it is activated.

To cancel or ﬁnish the twin needle sewing, press the twin needle

button twice.

PLEASE NOTE:

When the twin needle mark is blinking, all the other keys

and buttons will not be responding. Press the twin needle

button again. For twin needle sewing, please refer to page

54.

PLEASE NOTE:

Use the thread cutter on the head cover if the thread is #30

or thicker.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.