Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 71 van 76
TROUBLESHOOTING
71
2024-07 EN 5020105.10A.04
Fault Cause Solution
Upper Thread Breaks
Incorrect needle/thread
combination.
> Match the needle with the thread size.
Upper thread is too tight. > Reduce the upper thread tension.
Incorrectly threaded. > Rethread.
Poor quality thread. > Use quality thread.
The stitch plate or the hook tip is
damaged.
> Contact your bernette dealer to have the damages
repaired.
> Replace the stitch plate.
Lower Thread Breaks
The bobbin is not inserted
correctly.
> Remove and reinsert the bobbin and pull on the thread.
– The thread should run easily.
The bobbin is wound incorrectly. > Check bobbin and thread correctly.
The stitch hole in the stitch plate
is damaged.
> Contact your bernette dealer to have the damages
repaired.
> Replace the stitch plate.
Needle blunt or bent. > Replace the needle.
Needle Breaks
The needle is incorrectly inserted. > Insert the needle with the flat side to the back as far up
as it will go into the needle holder and tighten the
screw.
Fabric has been pulled. > Feed the fabric evenly.
Thick fabric has been pushed. > Use a presser foot that is suitable for thick fabric.
> Use the height compensation tool when sewing over a
thick seam.
The thread is knotted. > Use quality thread.
The Machine doesn't Start
The machine is switched off. > Switch the machine on.
The machine is not connected to
the power supply.
> Connect the power plug to the supply.
The machine is defective. > Contact your bernette dealer.
Unfavorable room temperature. > Place the machine in a warm room one hour before use.
> Connect the machine and switch it on.
The presser foot is raised. > Lower the presser foot.
Neither the sewing light nor
the light on the free arm
lights up
The sewing light is defective. > Contact your bernette dealer.
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
