Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 67 van 76
MAINTENANCE AND CLEANING
67
2024-07 EN 5020105.10A.04
> Clean the feed dog with the brush.
> Refit the stitch plate. Insert both screws and tighten them.
> Insert the bobbin cover.
> Raise the feed dog.
> Insert a needle.
> Attach the presser foot.
> Connect the machine to the mains power and switch it on.
8.2 Cleaning the Bobbin Case
CAUTION
Electronically Driven Components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply.
> Remove the presser foot and the needle.
> Open the bobbin cover and remove the top bobbin cover.
> Remove the stitch plate.
> Remove the bobbin from the bobbin case.
> Clean the bobbin case with the brush.
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
