Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 55 van 76
DECORATIVE STITCHES
55
2024-07 EN 5020105.10A.04
5.2 Altering the Stitch Density
When using the satin stitch, the stitch density can be adjusted by changing the stitch length. A short stitch
length means that the distance between stitches is shorter and the stitch is denser. A longer stitch length
means that the distance between stitches is greater and the stitch is less dense.
> Set the stitch selector to «K».
> Adjust the stitch length.
> Adjusting the stitch length changes the stitch density.
5.3 Gathering Stitches
Gathering
Ideal for delicate and medium-weight fabrics. For decorating clothing or decorative items.
> Fit the zigzag foot.
> Set the stitch pattern selector knob to position «A».
> Set the stitch width to «0».
> Set the stitch length to «4».
> Set the needle position to «Center».
> Set the thread tension to «2» or less.
> Pull out around 5cm of the upper thread and bobbin thread.
> Sew along the fabric edge at a distance the same as the width of the foot. At the start, make a few
reverse stitches to sew it up. Leave the protruding ends of the thread around 10–12cm long.
> Sew additional lines at a distance of approx. 5mm. At the start, make a few reverse stitches to sew it up.
Leave the protruding ends of the thread around 10–12cm long.
> Pull the bobbin threads and distribute the folds evenly.
Smocking
Decorative stitches that are sewn over ruffles are referred to as smocking. This technique is used to decorate
blouses or cuffs, among other purposes. Smocking gives fabric texture and elasticity. The following stitches
are suitable for smocking:
• Honeycomb stitch (S1, C)
• Faggot stitch (S1, G)
> Fit the zigzag foot.
> Set the stitch pattern selector knob to position «A».
> Set the stitch length to «4».
> Set the thread tension to «2» or less.
> Sew a tacking stitch 1cm away.
> Tie the threads in a knot on one side.
> On the other side, pull the bobbin threads and distribute the folds evenly.
> Secure the threads.
> Select the honeycomb stitch or faggot stitch.
> Set the stitch width to «6».
> Set the thread tension to «4».
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
