Bernette b05 Crafter handleiding
Handleiding
Je bekijkt pagina 49 van 76
PRACTICAL STITCHES
49
2024-07 EN 5020105.10A.04
4.12 Sewing Vari Overlock
> Fit the overlock foot.
> Set the stitch pattern selector knob to «D».
> Set the stitch length and stitch width according to the stitch table.
> Sew the fabric with the edge of the fabric against the overlock foot guide.
4.13 Narrow Edgestitching
> Fit the blind stitch foot, edge stitch foot or zigzag foot.
> Set the stitch pattern selector knob to «A».
> Set the required stitch length.
> Set the stitch width to «0».
Using the blind stitch foot or edge stitch foot:
> Place the left-hand edge of the fabric against the guide of the blind stitch foot or edge stitch foot.
> Set the left-hand needle position.
Using the zigzag foot:
> Guide the edge of the fabric along the right-hand edge of the presser foot or the markings on the stitch
plate.
> Adjust the needle position to the right.
4.14 Wide Edgestitching
1
2
1 Distance in mm 2 Distance in inch
> Fit the blind stitch foot, edge stitch foot or zigzag foot.
> Set the stitch pattern selector knob to «A».
> Set the required stitch length.
> Set the stitch width to «0».
Using the Zigzag Foot
> Guide the edge of the fabric along either the right-hand edge of the presser foot or the markings on the
stitch plate.
The markings on the stitch plate indicate the distance between the center needle position and the guideline.
Bekijk gratis de handleiding van Bernette b05 Crafter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bernette |
| Model | b05 Crafter |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14539 MB |
